I’ve tested the ISO on three differents computers (two laptops and one desktop) without success. There is an argument passed to the kernel (found in menu.lst file) which contains a parameter blocking the firmware upgrade, I think it is related to a serial number, the value is near of my SSD S/N. I’ve found something I suspect to be a mistake in iso (at least for the SanDisk Ultra+ SSD SDSSDHP-128GB model, I have not checked the others).

Remove the boot CD/DVD from the drive and restart computer.

When the update is completed, Press ENTER to shutdown computer.

Select the drive you want to update from the list displayed.

After restart, your system will boot to the SanDisk Firmware Updater.

With the firmware disk inserted Press and hold the “C” key while the computer restarts. Make sure the CD/DVD drive is the first device in the boot sequence defined in the BIOS, and restart your computer with the newly created CD/DVD boot disk inserted. iso file and select ‘Burn Image’īurn image with Mac: Use Mac Disk Utility Step 2 - Burn the saved image file to a CD/DVD with another software application then boot from the CD and perform the firmware update.īurn image with Windows 7 or 8: Right-click on the. Step 1 - Verify the capacity and model number (Using Device manager or SSD ToolKit) of your SanDisk Ultra+ SSD and download the corresponding firmware ISO After the Firmware upgrade is complete log back in to the BIOS and change the SATA mode back to Legacy IDE If your computer’s SATA mode is set to Legacy IDE please change the SATA mode to AHCI before performing the Firmware update. Note: If the Firmware upgrade fails to install please check your BIOS SATA mode.

In System Information on the left side select Serial ATA, The Model number will be listed on the top right window Open Macintosh Hard drive > Applications > Utilities > System InformationĢ. Method 2 - Under Device Manager > Disk Drivesġ. The model number will be listed under Drive Info > Model Additionally you will need to know the capacity of your Ultra+ SSD and select the corresponding download below Do not use the SSD label to verify model number. Please verify the model number using one of the methods below. The Label on the SSD itself will always show SDSSDHP regardless of the internal model number.

There is no functional difference between the two different model numbers. Note: The SanDisk Ultra+ SSD has two different model numbers. WARNING: Applying the wrong firmware ISO to your SSD product will render the drive unusable! Please confirm the capacity of your SSD product before proceeding with the firmware download and update. You MUST use the correct firmware ISO for the capacity SSD you have installed. Each capacity drive has a separate Firmware ISO. SanDisk has released the ISO firmware images to allow SSD firmware update on operating systems that are NOT supported by the SanDisk SSD Toolkit.

Landisk firmware update